An applicant seeking review of technical design and construction plans shall submit the following required documents, prepared by a professional engineer or professional surveyor registered in the state of Ohio, and drawn at a scale not less than 50 feet to the inch on one or more sheets not larger than 24 by 36 inches in size, in addition to the application for technical design and construction plan review:
(A) Profiles showing existing and proposed elevations along centerlines of all roads. Where a proposed road intersects an existing road or roads, the elevation along the centerline of the existing road or roads within 100 feet of the intersections shall be shown. Approximate radii of all curves, lengths of tangents and central angles on all streets shall be shown;
(B) Plans and profiles, construction details and quantities, showing the locations and typical cross-section of:
(1) Street pavements including curbs and gutters, sidewalks, drainage easements, rights-of-way, manholes and catch basins;
(2) The location of street lighting standards, street signs and subdivision identification signs;
(3) The location, size and invert elevations of existing and proposed sanitary sewers, storm water drains, and fire hydrants, showing connection to any existing or proposed utility systems; and
(4) The exact location of all water, gas or other underground utilities or structures.
(C) Location, size, elevation and other appropriate description of any existing facilities or utilities, including, but not limited to:
(1) Existing streets, sewers, drains, water mains, easements, water bodies, streams, swamps, railroads, buildings and other pertinent features; and
(2) The water elevations of adjoining lakes or streams at the date of the survey, and the approximate high water elevations, referred to the U.S.G.S. datum. If the subdivision borders a stream or open ditch the distances and bearings of a meander line established not less than 20 feet from the ordinary high water mark of such waterway shall be shown.
(D) All specifications and references required by the village’s construction standards and specifications, including a site grading plan for the entire subdivision; and
(E) Additional plans, specifications, profiles or details necessary to ensure compliance with the requirements of these regulations.
(Ord. 2023-03, passed 2-27-2023)