(A) Prior to the placement (or replacement) of any and all mobile homes within the village limits, a permit must be obtained from the government center office and the site for the mobile home must be inspected by the Code Administrator to ensure compliance with lot size regulations contained herein.
(B) Mobile homes presently within the village that are over ten years of age are not prohibited at their present location.
(C) Any new mobile home brought into the village must have a shingled roof along with siding that is not a metal type of material. Any current non-conforming mobile home shall not be moved to another location within the village, effective as of the date of this section.
(D) Any mobile home brought into the village must be Underwriter's Laboratory and National Electrical Code approved; must be inspected by a qualified electrician approved by the village; and must be set up, hooked up to the village utilities and be inspected and ready for occupancy within 45 days from the time the mobile home is brought into the village. Otherwise, the mobile home must be removed from the village. The village will provide no services until the inspection has been completed.
(E) No mobile home shall be located in the village unless the unit has the National Manufacturers Housing Construction and Safety Standard Metal seal affixed thereto.
(F) Existing mobile homes located within the village limits, at the date of the adoption of this section are considered a non-conforming use at their present location. All replacements or new mobile homes located with the village limits must meet all requirements of this section.