The following provisions of the International Building Code, 2015, are hereby revised through addition, insertion or change:
(A) In § 101.1 (page 1), insert “the Village of Swansea, Illinois”;
(B) In § 101.4.3, Plumbing, replace “International Plumbing Code” with “Illinois State Plumbing Code”;
(C) Amend § 102.1, General, by adding the following sentence to the end of the existing paragraph;
(D) Amend § 1101.2, Design, to read as follows:
“1101.2 STANDARD: Buildings and facilities shall be designed and constructed to be accessible in accordance with this code and the Illinois Accessibility Code, as published by the State of Illinois Capital Development Board.”
(E) Add § 310.7, General - Concrete and Masonry Construction,
“In all Use Group R-1, R-2 and R-4 structures containing four or more units, the following shall apply:
(a) Use of Brick - A minimum of twenty five percent (25%) of the exterior side of exterior walls shall be faced with brick. Door and window openings shall be excluded from the calculation.”
(F) Replace Chapter 29 with the following:
“The provisions of the Illinois State Plumbing Code shall govern the erection, installation, alteration, repairs, relocation, addition to, use or maintenance of plumbing equipment and systems.”