(a) Residential lots where public water and sanitary sewers are not provided shall be not less than 20,000 square feet in area nor have less than 100 feet lot width.
(b) Residential lots where either public water or public sanitary sewer (only one) are provided shall be not less than 15,000 square feet in area and have a minimum lot width of 75 feet.
(c) Residential lots having public water and public sanitary sewer shall be not less than 10,000 square feet in area and have a minimum lot width of 75 feet.
(d) Where lots are intended for the use of more than one family, the minimum lot area shall be increased by 1,250 square feet for each family more than one, and the minimum lot width shall be increased by 10 feet for each family more than one.
(e) Lot and area requirements shall be increased in size where the average front to rear or side to side lot slope is in accordance with the following:
Slope | Requirement |
0 - 8% | As required above |
9 - 15% | Minimum lot size + 10% area increase |
16 - 24% | Minimum lot size + 20 % area increase |
25% and over | Minimum lot size + 50 % area increase |
(f) Lot lines should be laid out so as to intersect at right angles for streets or radial to curvilinear streets.
(g) All lots shall have frontage upon an approved and improved public street.
(Ord. 9-3-68.)