The subdivider shall furnish the following:
(a) Application.
(b) Final Plat Drawing. The final plat shall be drawn in ink on bond paper or mylar, or whatever material then required by the Summit County, Ohio Fiscal Office or their designated authority, drawn 18 inches by 24 inches within the border and shall be at a scale approved by the City Engineer. Where necessary, the plat may be on several sheets accompanied by an index sheet showing the entire subdivision. The final plat shall show the following:
(Ord. 2022-100. Passed 5-26-22.)
(1) Identification:
A. The name of the subdivision, which name shall be the same used on the preliminary plan, and the original lot or section number; and
B. A vicinity map drawn to scale and with the north arrow;
(2) Control points to the nearest established of which all dimensions, angles, and bearings are to be referred;
(3) Lines and boundaries, including the centerline and right-of-way line of streets, easements, and other rights-of-way, natural and artificial watercourses, streams, shorelines, corporation lines, and property lines of all lots and parcels, with distances, radii, arcs, chords, and tangents of all curves to the nearest one-hundredth of a foot and bearings or deflection angles to the nearest second;
(4) Streets, including the name, which must not duplicate another in the area and the right-of-way width of each street within the proposed subdivision and those adjoining;
(5) The required building setback lines, accurately shown with dimensions;
(6) Lot and block identification. Lots shall be numbered in consecutive order and, when the subdivision is submitted in sections or phases, lots shall be numbered consecutively as each section or phase is submitted;
(7) Total site data, including acreage, number of residential lots, minimum lot size, and acres in parks and other public uses;
(8) Easements and land for public use, showing boundaries and identifying the use of all parcels which are to be dedicated or reserved for public use or easements;
(9) Monuments, including the accurate location and description of those found set or to be set;
(10) The names of the recorded owners of adjoining unplatted land and reference to the subdivision plats of adjoining platted land by name, volume, and page of the recorder's maps;
(11) An accurate background drawing of all metes and bounds descriptions of the land from which the plat is drawn;
(12) Certification by a registered surveyor that the plat represents a survey made by him which balances and closes, that the monuments shown thereon actually exist and that all dimensional and geodetic details are correct;
(13) Notarized certification by the owner of the subdivision of the offer of the dedication of streets and other public areas and that there are no unpaid taxes or special assessments against the land contained in the plat;
(14) Notation for signatures by:
A. The Clerk and the Chairman of the Planning Commission;
B. The Chairman of the Planning Committee of Council;
C. The Clerk of Council;
D. The Mayor;
E. The City Engineer, with certification that required improvements have been satisfactorily installed or adequate financial guarantees have been provided; and
F. The county auditor and county recorder, with proper notations for transfer and recording; and
(15) Covenants, if any.
(Ord. 2007-222. Passed 1-10-08.)