The purpose of this district is to provide a place for low density residential uses where public water and sewer service may be available.
(A) Permitted uses.
(1) Any use permitted in the RA District;
(2) Rooming houses; and
(3) Multi-family dwellings of four units or less.
(B) Special use permit required.
(1) Any special use permitted in the RA District; and
(2) Multi-family dwellings of over four units. A plan of any proposed multi-family development of over four units in the principal structure, shall be submitted to the Planning Board for review and approval. The plan shall show all curb cuts, driveways, off-street parking areas, walkways, and open areas to be set aside for special uses; the location, height and materials for any proposed wall, fences and screen planting, the types of paving or other surfacing to be used in the various areas; and such other site information as may be necessary to describe completely the proposed development.
(C) Special uses. Any special use (with the same requirements and restrictions) permitted in the RA District.
(D) Dimensional requirements.
Corner side yard | Minimum required width of any corner side yard per structure | 18 feet |
Front yard | Minimum required mean depth of front yard per structure | 25 feet |
Lot area | Minimum required area for the first dwelling unit | 6,000 square feet |
Minimum required additional area for each additional dwelling unit in the principal structure | 3,000 square feet | |
Lot coverage | The total ground area covered by the building (and all accessory buildings, including any roofed area) shall not exceed 40% of the total lot area | |
Lot width | Minimum required mean lot width | 60 feet |
Rear yard | Minimum required mean depth of rear yard | 20 feet |
Side yards | Minimum required width of side yard per structure | 10 feet |
(Ord. passed 7-1-1980; Res. R-2021-03, passed 6-24-2021)