(A) See each zoning area for specific requirements for number of parking spaces and locations.
(B) A parking space shall be a minimum area as defined in the figure below and the table below.
(C) Approval for location of all exit and entrance driveways shall be obtained from the Board, Town Council or designee. Such approval shall also include the design and construction thereof in the interests of safety, adequate drainage and other public requirements.
Parking Stall Dimensions (Standard Vehicle, Dimensions in feet)
| ||||||
A | B | C | D | E | F | G |
0 degrees | 10 | 25 | 10 | 25 | 24 | 12 |
30 degrees | 10 | 20 | 18.4 | 19 | 24 | 15 |
45 degrees | 10 | 20 | 21 | 13.5 | 24 | 15 |
60 degrees | 10 | 20 | 22.3 | 11.5 | 24 | 20 |
90 degrees | 10 | 20 | 20 | 10 | 24 | 20 |
(D) Except when expressly permitted by ordinance or the Town Administrator or his or her designee, parking areas required by this chapter, and publicly owned parking areas, shall not be used for the storage or continuous parking of recreational vehicles, trailers, motor homes, motor vehicles or junk for more than a 72-hour period.
(E) For shared parking lots, wherein the parking requirements for two or more structures are shared in a common space, the shared parking relationship shall be documented prior to the issuance of a building permit. Documentation shall consist of a binding covenant on the deed to each property that is on file with the County Clerk and which describes the terms of shared use and the existence of an association of all shared property owners to improve, maintain and remove snow from the parking lot.
(1) Angle of parking;
(2) Stall width;
(3) Stall length;
(4) Stall depth;
(5) Curb length;
(6) Two-way drive aisle width; and
(7) One-way drive aisle width.
(Prior Code, § 9.05.090)