Lot markers on property corners set during the course of such surveys, or resurveys shall conform to the following requirements.
(A) In firm soil, No. 5 steel rebar 18 to 24 inches long with metal caps or tags identifying the corner.
(B) In concrete walks or curbs, three-fourths-inch diameter blind rivet with one-fourth-inch diameter shank.
(C) In solid rock, blind rivet as in division (B) above or one-fourth-inch diameter by three-inch long iron bar grouted in drilled hole two inches deep.
(D) Field and/or office data indicating how the point and line of beginning were established and the tolerance used as well as any adjustments made to ensure mathematical closure of the survey.
(E) Drawings shall be submitted on sheets eight and one-half inches by 14 inches drawn to scale, the scale used shall be such as to ensure adequate showing of detail as may be required by the town.
(F) An electronic/digital copy of the survey shall be provided at a scale and format acceptable to the town at the time the survey is accepted. The electronic/digital copy shall reflect the survey as it appears on the hard copy.
(Prior Code, § 14.01.160) (Ord. 2018-10, passed 8-8-2018)