(A) Compliance Meeting: Should a violation of this chapter by an industrial user occur, whether or not a significant user, the POTW shall notify the offending user, in writing, as to the particulars of such violation or violations and set a time and place for a meeting to be attended by representatives of the POTW and the industrial user. The purpose of such a meeting shall be to establish such procedures, investigations, studies and compliance measures as the POTW deems necessary and desirable to control and prevent violations of this chapter. The industrial user shall cooperate fully with the POTW in making such investigations and studies.
(B) Compliance Requirements:
1. Following the completion of any procedures, investigations or studies as described in subsection (A) of this section, the POTW may:
(a) Require compliance with applicable pretreatment standards and requirements;
(b) Control the contribution to the POTW to ensure compliance with applicable pretreatment standards and requirements;
(c) Require: 1) the development of a compliance schedule for the installation of technology required to meet applicable pretreatment standards and requirements and 2) the submission of all notices and self-monitoring reports as are necessary to assess and assure compliance by industrial users with pretreatment standards and requirements, including, but not limited to, the reports required by 40 CFR section 403.12.
2. If the POTW has sufficient information at the time of the compliance meeting to determine necessary and desirable compliance measures, it may, at the time of the compliance meeting, issue a directive requiring the industrial user to take such action, including pretreatment, without further investigation or study.
3. Failure to comply with said directive shall be deemed a violation of the chapter and may be grounds for such actions as may be authorized for violation of this chapter. (Ord., 6-17-1985)