§ 151.065 SPECIAL REQUIREMENTS FOR MANUFACTURED HOMES.
   (A)   Within any Floodway Area/District, manufactured homes shall be prohibited.
   (B)   Within any identified floodplain area, manufactured homes shall be prohibited within the area measured 50 feet landward from the top-of-bank of any watercourse.
   (C)   Where permitted within any identified floodplain area, all manufactured homes, and any improvements thereto, shall be:
      (1)   Placed on a permanent foundation;
      (2)   Elevated so that the lowest floor of the manufactured home is at least one and one-half feet above the base flood elevation;
      (3)   Anchored to resist flotation, collapse or lateral movement; and
      (4)   Have all ductwork and utilities including HVAC/heat pump elevated to the regulatory flood elevation.
   (D)   Installation of manufactured homes shall be done in accordance with the installation instructions provided by the manufacturer. Where the applicant cannot provide the above information, the requirements of Appendix E of the 2009 International Residential Building Code or the U.S. Department of Housing and Urban Development’s Permanent Foundations for Manufactured Housing, 1984 Edition, draft or latest revision thereto shall apply as well as 34 Pa Code Chapters 401-405.
   (E)   Where the manufacturers’ standards for anchoring cannot be provided or were not established for the units(s) proposed installation, consideration shall be given to the installation requirements of the 2009 IBC, the 2009 IRC, or the most recent revisions thereto and the 34 Pa Code, as amended, where appropriate and applicable.
(Ord. 177, passed 2-24-2015)