(A) A plat of any proposed minor subdivision, as defined in § 154.22, shall be submitted to the Town Manager or Town Planner for review by the Technical Review Committee, which shall have the authority to approve or disapprove the plat. The Technical Review Committee shall consist of the Town Manager, Town Planner and Public Works Director.
(B) Minor subdivisions shall conform to the following requirements:
(1) A minimum of three copies of a minor subdivision plat shall be submitted.
(2) The plat shall be at an appropriate engineering graphic scale but no less than 1 inch equaling 200 feet. The title, date and north point arrow shall be noted.
(3) A minor subdivision plat submitted for review shall be accompanied by an application and review fee as per the town's schedule of fees.
(4) The following certification shall be lettered, rubber stamped or affixed to the plat in a manner so as to insure that the certificate will be legible on any prints made therefrom:
I hereby certify that this Minor Subdivision meets the requirements of § 154.22 of Chapter 154 of the Code of Ordinances of Spencer, North Carolina.
Signature and Title
_______________________________
(5) The following contents are required for minor subdivision plats:
(a) A sketch vicinity map showing the location of existing and platted property lines, proposed subdivision lines, streets, rights-of-way, buildings, water courses, railroad transmission lines, sewers, bridges, culverts, drainage pipes, water mains, town limit lines, public utility easements and north arrow declination;
(b) Boundaries of property concerned shown with bearings and distance;
(c) Names of adjoining property owners or subdivisions;
(d) Zoning classification on the land to be subdivided and on adjoining lands;
(e) Proposed minimum setback lines;
(f) Site data:
1. Acreage in total tract to be subdivided;
2. Average lot size;
3. Proposed street and lot layout;
4. Total number of lots existing and proposed; and
5. Existing and proposed property lines.
(g) The name of the owner, engineer, surveyor and/or planner;
(h) The title, with the name, date and scale, denoted graphically or numerically; and
(i) An erosion control plan, if applicable.
(6) The Technical Review Committee shall review the minor subdivision plat for general compliance with the requirements of this chapter and Chapter 155, and make any recommendations necessary. The Technical Review Committee shall advise the subdivider, in writing, of approval or disapproval of the plat within 14 working days after it has been received.
(`94 Code, App. B, Art. V, § 3) (Ord. 96-10, passed 8-13-96)