(A) All new construction and substantial improvements within a flood hazard area, including the placement of prefabricated buildings and mobile homes, shall:
(1) Be designed and anchored to prevent flotation, collapse or lateral movement of the structure;
(2) Be constructed with materials and utility equipment resistant to flood damage; and
(3) Be constructed by methods and practices that minimize flood damage.
(B) All new and replacement water supply systems shall minimize or eliminate infiltration of flood waters into the systems.
(C) All new and replacement sanitary sewage systems shall minimize or eliminate infiltration of flood waters into the systems and discharges from systems into flood waters. On-site waste disposal systems shall be located to avoid impairment to the system or contamination from the system during flooding.
(D) All public utilities and facilities shall be designed, constructed and located to minimize or eliminate flood damage.
(E) Adequate drainage shall be provided to reduce exposure to flood hazards.
(F) Compliance with the standards of this section shall be certified by a registered, professional engineer or architect.
(G) Land shall not be divided in a manner creating parcels or lots that cannot be used in conformance with the requirements of this subchapter.
(H) The flood carrying capacity of any altered or relocated watercourse not subject to state or federal regulations designed to ensure flood-carrying capacity shall be maintained.
(I) Available flood hazard data from federal, state or other sources shall be reasonably utilized in meeting the standards of this section. Data furnished by the Federal Insurance Administration shall take precedence over data from other sources.
(Ord. passed 7-12-2012, § 13.4)