(A) Final plat shall be drawn in ink on sheets not to exceed 24 inches wide by 36 inches long and shall be at a scale of not less than 50 feet to one inch. Where necessary, the plat may be on several sheets accompanied by an index sheet showing the entire subdivision, as well as an electronic copy in an acceptable format. For large subdivisions, the final plot may be submitted for approval progressively in contiguous sections satisfactory to the Plan Commission. The final plat shall show the following:
(1) Primary control points, approved by the Village Engineer, or descriptions and ties to such control points, to which all dimensions, angles, bearings, and similar data on the plat shall be referred;
(2) Tract boundary lines, right-of-way lines of streets, easements and other rights-of-way, and property lines of residential lots and other sites; with accurate dimensions, bearings, or deflection angles, and radii, arcs, and central angles of all curves;
(3) Name and right-of-way width of each street or other right-of-way;
(4) Location, dimensions, and purpose of any easement;
(5) Number to identify each lot or site and block;
(6) Purpose for which sites, other than residential lots;
(7) Proposed building setback line on all lots and other;
(8) Location and description of monuments;
(9) Names of record owners of adjoining unplatted land;
(10) Certification by surveyor or engineer certifying to accuracy of survey and plat;
(11) Certification of title showing that applicant is land owner;
(12) Statement by owner dedicating streets, rights-of-way, and any sites for public uses;
(13) Certification of approval by the Plan Commission;
(14) Name of subdivision;
(15) Location by section, township, and range; and
(16) Title, scale, north arrow, and date.
(B) Cross sections and profiles of streets showing grades approved by the Village Engineer. The profiles shall be drawn to village standard scales and elevations and shall be based on the village datum plane.
(C) A certificate by the Village Engineer certifying that the subdivider has complied with one of the following alternatives:
(1) All improvements have been installed in accordance with the requirements of these regulations and with the action of the Plan Commission giving conditional approval of the preliminary plat; or
(2) A bond or certified check has been posted, which is available to the village, and in sufficient amount to assure such completion of all required improvements.
(D) Protective covenants in form for recording.
(E) Such other certificates, affidavits, endorsements, or deductions as may be required by the Plan Commission in the enforcement of these regulations.
(Ord. 889, passed 8-4-2005)