(A) Use regulations. In an MD - Manufacturing District, no land shall be used and no building shall be erected for or converted to any use other than those listed in § 156.09 for this district.
(B) Height regulations. No building shall exceed 70 feet in height.
(C) Area regulations.
(1) Front yard. No front yard shall be required unless:
(a) The street is less than 60 feet in width, in which case the front yard setback shall be a minimum of 25 feet.
(b) A zoning district having a required setback is located on the same side of the street between intersecting streets. In such case, the front yard shall be a minimum of 25 feet.
(2) Side yard.
(a) Where a side lot line in an MD zoning district adjoins a residential zoning district or is separated from a residential zoning district by an alley with a minimum width of 20 feet, no side yard is required.
(b) Where a side lot line in an MD zoning district adjoins any non-residential zoning district, the side yard shall not be less than ten feet. The side yard of the corner lots shall not be less than ten feet.
(3) Rear yard.
(a) When a rear yard line in an MD zoning district adjoins a residential zoning district or is separated from a residential zoning district by an alley with a minimum width of 20 feet, no rear yard is required.
(b) When a rear yard line adjoins any non-residential zoning district, there shall be a rear yard with a minimum depth often ten feet.
(4) Area of lot. The minimum area of the lot shall be 5,000 square feet.
(5) Width of lot. The minimum width of the lot, when measured 20 feet behind the right-of-way line, shall not be less than 50 feet.
(6) Depth of lot. The minimum lot depth of the lot shall be 100 feet.
(Ord. passed 11-17-2015)