10-5-5: PERFORMING ELECTRICAL WORK:
   A.   Permit Required:
      1.   It shall be unlawful for any person, firm or corporation to proceed with any electrical work connected or to be connected with the electrical system of the city until a permit for such work has been obtained from the electrical inspector.
      2.   Applicants for the permit described herein shall, prior to proceeding with any work requiring such permit, call the office of the electrical inspector and give the name of the electrical contractor who is to do such work and the address where the work is to be done. The contractor shall be furnished one copy of the permit. (1991 Code § 5-11)
   B.   Submission Of Plans:
      1.   The electrical inspector may require the submission and approval of plans and specifications in duplicate showing the nature and extent of the proposed work before a permit is issued. If, in the course of the work, it is found necessary to make any change from the approved plans and specifications on which a permit has been issued, amended plans and specifications shall be submitted and, if approved, a supplementary permit shall be issued to cover the change after the same conditions required to secure the original permit have been satisfied.
      2.   All plans and specifications required to be submitted shall be examined by the inspector for conformance with the provisions of this chapter and the electrical code.
      3.   Nothing in this subsection B shall be construed to prevent the issuance of a permit for the installation of part of an electrical system before the entire plans and specifications of the system have been submitted or approved, if adequate information and detailed statements have been presented for the same and have been found to comply with this chapter and the electrical code. (1991 Code § 5-12)
   C.   Inspection: It shall be the duty of any person, firm or corporation doing any electrical work and who has obtained an electrical permit to report the same for rough-in inspection as soon as such work is ready for inspection, and when the work is ready for final inspection. (1991 Code § 5-15)
   D.   Alteration After Inspection: It shall be unlawful for any person, firm or corporation to alter or change any wire conduit or fixture or to remove any material or fixture after inspection has been made without first obtaining a permit from the electrical inspector to do so, and the electrical inspector shall then reinspect all work altered or changed, and the same fee shall be charged as hereinabove provided for original inspections. (1991 Code § 5-19)