(A) No part of a projecting sign shall be supported from an unbraced parapet wall. All metal parts used in sign or structure, including pole or pylon, metal, supports and braces, shall be galvanized or of corrosive-resistant material or painted with approved corrosive-resistant paint. When existing poles or structures are used for new sign installation, all parts shall be brought to like-new condition and shall be painted with approved rust and corrosion-resistant paint. Existing pole and installation of pole shall be approved before being used in new sign installation.
(B) When a sign is removed for any reason, a new sign permit for future installation of the sign shall be obtained, or all mast arms, cable, guys of any nature, clips, brackets and all structures of the old sign shall be removed with the sign.
(C) No equipment such as cable to support electric circuits, light fixtures, guys, etc. may be added to sign structure or supports other than as approved by the Building Inspector in the sign permit. Brackets, wires, switches, etc., required to illuminate the sign may be added. When sign structure or supports are used in any manner other than outlined above, certification by a licensed engineer shall be obtained to show the structure is capable of supporting the load.
(D) Projecting signs, such as marquee signs, shall not be installed on a building or structure unless the support has been designed specifically for the purpose of supporting a sign and approved by the Zoning Enforcement Officer.
(E) No sign or outdoor display structure shall be of such character or with such inscription or marking that it may be mistaken for a highway sign or marker. No sign of any description shall be installed, erected or constructed in such a manner as to obstruct any fire escape or any door or window giving access to any fire escape, nor shall a sign be attached in any form, shape or manner to a fire escape.
(F) All electrical signs shall be plainly marked on the bottom edge of the sign using three-fourths inch minimum letters with the erector's name, the voltage, amperes or watts, and the date of installation. All signs shall be grounded.
(G) All wiring, fittings and materials used in the construction, connection and operation of electrically illuminated signs shall be in accordance with the provisions of the National Electric Code. Electric sign wiring shall be maintained in weather-proof condition during erection or alteration by use of permanent or temporary cover.
(Ord. 09-3306, passed 10-15-09)