All applications for subdivision approvals, building permits or occupancy permits made by or on behalf of the owner shall be submitted to the Clerk of Council of the Village, and shall include the information hereinafter required unless found inapplicable by the approving authority. For an occupancy permit the information submitted with the building permit application should generally be sufficient. Each application shall be signed by the applicant, and submitted with a plan of the improvements in triplicate, prepared by an architect, engineer, or surveyor acceptable to the Planning Commission.
(a) Narrative Information.
(1) Name, address, and telephone number of applicant and property owner.
(2) Address and parcel number(s) of the subject property.
(3) Legal description of the property, including any applicable easements or restrictions of record.
(4) Zoning district, existing and proposed use(s).
(5) For all uses proposed or retained; building and structure heights, number of parking spaces, total building coverage, and floor area.
(b) Plans. All plans shall be drawn to scale, of one inch equals twenty feet, or smaller scale if required to show entire property, indicating the following minimum information. The approving authority may require additional information, or where applicable may delete certain of the following requirements.
(1) Subdivisions. See subdivision requirements in Title 7, infra.
(2) Building permits.
A. The address, and\or lot number, street name, dimensions of the lot, and north arrow.
B. Existing buildings located upon the lot.
C. The size and location of the proposed building, or addition for which the application is made.
D. Plan drawings of the building or addition (minimum 17 x 22 inches) for floor plans, elevations, section plans and plot plans drawn to the following scale:
1. Floor plan 1/4" = 1'
2. Elevation drawings 1/4" = 1'
3. Section drawings 3/8" = 1'
4. Plot plan 1" = 20'
E. The plans shall include existing grades and any changes in elevation which shall affect drainage from or onto adjacent property or abutting streets.
F. All dimensions must be shown including lot lines, required set back lines, planned set back lines, dimensions from lot lines to building faces, and to overhangs.
G. Existing or new property pins shall be indicated. If pins are not found they shall be placed.
H. Plot plan drawings shall show finished elevation of the final grade, footer, basement floor and first floor on new construction.
I. Landscape and open space plans, including tree locations and the location of trees to be removed.
J. Driveway locations, and the composition thereof.
(Ord. 17-1994. Passed 6-6-94.)