The standards set forth below shall apply to signs in all districts designated as residential on the official zoning map, except for the commercial residential (CR) district. Signs in residential districts, unless otherwise exempted in this chapter, shall require sign permits consistent with Section 20.58.020 and shall be subject to the findings required in Section 20.58.040. Signs in excess of the listed standards shall be prohibited.
A. Project Identification. The owner of a multi-structure apartment project or the developer or homeowner’s association of a multi-structure condominium project shall be eligible to install project identification signs as follows:
Location: | Building, wall or ground |
Maximum number: | 1 per street frontage, up to 2 per project |
Maximum area: | 20 square feet |
Maximum height: | 3 feet |
Permitted copy: | Project name, address and logo |
Other standards: | May not be internally illuminated |
B. Building Identification. The owner of an apartment project or the developer or homeowner’s association of a condominium project shall be eligible to install building identification signs as follows:
Location: | Building, wall or ground |
Maximum number: | 1 per building |
Maximum area: | 12 square feet |
Maximum height: | 3 feet |
Permitted copy: | Building name and address |
Other standards: | May not be internally illuminated |
C. Temporary Signs. See Section 20.58.080(A). (Ord. 2024-06-1549 § 5 (part); Ord. 99-04-1252 §§ 1--3; Ord. 93-10-1169 § 2 (part))