Figure 4. An illustration of the potential development pattern in the R-2 Zone.
(a) Intent. The Residential Two-Family (R-2) Zone is intended to maintain and promote existing and provide for new suburban-style duplex neighborhood development patterns in numerous areas throughout the City. The desired development pattern in the R-2 Zone follows a suburban-style development pattern of two-family duplex residential structures situated on front yards.
(b) Uses. The uses permitted or conditionally permitted, including accessory uses, in the R-2 Zone are set forth on the Use Table in Section 1103.06.
(c) Development Standards. The standards applicable to the development of property within the R-2 Zone are set forth in the following tables and illustrated in the following diagrams. Building placement, form, and component standards are as follows:
Building Placement
|
Building Placement
| |
Lot Dimensions | |
Lot Size (min.) | 8,000 SF |
Lot Width (min.) | 60 ft |
Multi-Family Residential Density | |
Units Per Acre (max.) | 4 units |
Setbacks | |
Front Yard (min.) | 25 ft |
Side Yard (min., each side) | 8 ft to adjacent side lot line; none between attached units |
Rear Yard (min.) | 25 ft |
Use Area | |
Unit Area (min.) | 600 SF |
Building Form & Components
|
Building Form & Components
| |
Height | |
Building Height (max.) | 35 ft |
Accessory Building | |
Building Location | Rear yard only; 5 ft min. from any lot line; 10 ft min. from rear wall of primary structure |
ADU Height (max.) | Not Permitted |
Height, non-ADU (max.) | 18 ft |
Parking Location | |
No parking except on gravel, asphalt, concrete, pavers or similar surface in front or side yards | |
Signs | |
1 monument per subdivision entrance | |
(Ord. A-3075. Passed 1-24-22.)