§ 31.067 FEDERAL CATEGORICAL PRETREATMENT STANDARDS; MODIFICATION PROCEDURE
   (A)   Upon the promulgation of the Federal Categorical Pretreatment Standards for a particular industrial subcategory, the Federal Standard, if more stringent than limitations imposed under this chapter for sources in that subcategory, shall immediately supersede the limitations imposed under this chapter. The Manager shall notify all affected users of the applicable reporting requirements under 40 CFR, Section 403.12.
   (B)   When the city's wastewater treatment system achieves consistent removal of pollutants limited by Federal Pretreatment Standards, the city may apply to the approval authority for modification of specific limits in the Federal Pretreatment Standards. Consistent removal shall mean reduction in the amount of a pollutant or alteration of the nature of the pollutant by the wastewater treatment system to a less toxic or harmless state in the effluent which is achieved by the system in 95% of the samples taken when measured according to the procedures set forth in Section 403(7)(c)(2) of (Title 40 of the Code of Federal Regulations, Part 403) "General Pretreatment Regulations for Existing and New Source of Pollution" promulgated pursuant to the Act. The city may modify pollutant discharge limits in the Federal Pretreatment Standards if the requirements contained in 40 CFR, Part 403, Section 403(7), are fulfilled and prior approval from the approval authority is obtained.
(Ord. - -, passed 6-7-84)