Plans for fire alarms systems, water-based fire protection systems, fire pumps, special hazard fire suppression systems, high-piled storage arrangements and firestop systems shall be submitted for review during the City of Shelbyville's technical review process. Each applicable submittal must contain the following information:
(A) Sprinkler/standpipe systems:
(1) One full set of sprinkler/standpipe plans;
(2) One full set of sprinkler/standpipe
calculations;
(3) One copy of the sprinkler Construction
Design Release (CDR); and
(4) One set of manufacturer's cut sheets for all sprinkler heads in the design.
(B) Fire alarm systems:
(1) One full set of fire alarm plans;
(2) One set of battery calculations;
(3) One copy of the fire alarm Construction Design Release (CDR);
(4) One set of manufacturer's cut sheets for the Fire Alarm Control Panel (FACP) and fire alarm components; and
(5) One fire alarm sequence of operation Matrix.
(C) Special hazard fire protection systems:
(1) One set of plans (if applicable);
(2) One set of engineering data (if applicable);
(3) One copy of the Construction Design Release (if applicable); and
(4) One set of manufacturer's cut sheets for system components.
(D) Fire pumps:
(1) One copy of the manufacturer's fire pump specifications; and
(2) One copy of the manufacturer's certified pump test characteristic curve.
(E) Firestop systems:
(1) Through-penetration firestop systems;
(2) Membrane-penetration firestop systems;
(3) Fire-resistant joint systems;
(4) Perimeter Fire Barrier Systems; and
(5) Fire-Rated Duct and Air-Transfer Openings.
(Ord. 19-2868, passed 10-7-19)