When a detailed development plan is required by this chapter the development plan shall contain the following information:
(A) Name of development, name and addresses of owners, developers, engineers, surveyors and architects; vicinity map with accurate measurements to existing streets, date, scale, source of title and north arrow.
(B) Existing topography with a contour interval not greater than two feet unless specifically waived by the Planning Commission. Proposed contours with a contour interval corresponding to the existing contour interval may also be required.
(C) Names of adjacent subdivisions, together with the names and addresses of its owner(s) and the names and addresses of owners of adjacent non-subdivided land.
(D) Names, location, arrangement and dimensions of all existing platted streets, driveways or other public ways within or adjacent to the property and existing utility easements.
(E) Names, location, arrangement and dimensions of proposed streets and driveways or other public ways, including width of rights-of-way, parking areas (including total area of off-street parking), points of ingress and egress and sight distances of all entrances to existing streets.
(F) Building setback lines or building envelopes whichever is appropriate.
(G) Preliminary size and location of all proposed underground utilities lines for water, sewer, gas, telephone, and cable television if applicable.
(H) Provisions for handling surface water drainage within the project and surrounding area including drainage courses to natural waterways, or sinks and size and location of detention areas.
(I) Copy of proposed property owners association covenant or master deed or restrictions if applicable.
(J) Lot size and location.
(K) Height, floor area and arrangement of proposed buildings or structures; and number of dwelling units.
(L) Location of all existing buildings, structures and parking.
(M) Boundary survey including area and bearings and dimensions of all exterior property lines.
(N) When mixed uses are proposed, show location of these uses by general type, i.e., commercial, industrial, office and residential.
(O) Existing tree masses, significant rock outcroppings, streams, flood plains, and other natural features.
(P) Provisions for landscaping if applicable.
(Q) Recreational and open space area if applicable.
(R) Proposed stages of development if applicable, and the anticipated time required to develop each stage.
(S) Marketing or traffic study if applicable.
(T) All development plans shall be drawn to a sufficient scale to clearly delineate the applicant’s proposed use and development of the subject property. Such scale shall be indicated on the development plan.
(Ord. 665-98, passed 12-21-1998)