All final maps for subdivisions shall meet the following miscellaneous requirements for data thereon:
A. Information Required on Each Sheet: Each sheet, except the title sheets, shall bear the main title of the map, the scale and the north point.
B. Lot, Blocks and Boundary Lines: The bearing and length of each lot line, block line and boundary line shall be shown on the final map; provided, that when bearings or lengths of lot lines in any series of lots are the same, such bearings and lengths may be omitted from each interior parallel line of the series. No ditto mark or other designation of repetition shall be used.
C. Lot Areas: The area of each lot containing three-fourths (3/4) of an acre or more shall be designated to the second decimal place.
D. Curves: The arc length, radius and central angle or bearings of terminal radii of each curve and the bearing of each radial line to each lot corner on each curve shall be shown.
E. Street Names:
1. Approved names shall be used for every street shown on the final map.
2. The name of each newly dedicated portion of any street shall be shown in or arrowed to the newly dedicated portion.
3. Numerals and abbreviations shall not be used in delineating street names.
F. Widths of Streets, Alleys and Railroad Rights of Way:
1. The final map shall indicate the widths and fractional widths of each street and alley as follows: the total width dedicated prior to the recording of the final map; the width of additional strips to be dedicated by the final map, the total width including such additional strips; and the fractional total widths on each side of the center line.
2. The width of each railroad right of way appearing on the map shall be indicated thereon.
G. Power Lines and Water Mains: The boundary lines of all power line and water main easements shall be accurately delineated whenever the use of property lying within such lines is so restricted by the terms of the easement that the property cannot be devoted to the erection of structures.
H. Easements: The center line or side lines of each easement to which the lots in the subdivision are subject shall be shown on the final map. If such easement cannot be definitely located from the official records, a statement showing the existence of the easement shall be placed on the title sheet of the final map. All easements shall be delineated on the final map by fine dotted lines. Distances and bearings on the side lines of lots which are crossed by easements shall be so arrowed or shown as to indicate clearly the actual length and bearing of each lot line. The width of each easement and the lengths and bearings of the lines thereof and sufficient ties thereto to definitely locate it with respect to the subdivision shall be indicated. The purpose of each easement shall be designated and, if then of record, the record reference shall be given; all easements to be dedicated shall be included in the offer of dedication in the owner's certificate on the title sheet. The data pertaining to easements shall be smaller and lighter than other data.
I. City Boundary Lines: City boundary lines crossing or abutting the subdivision shall be clearly designated and tied in. (1954 Code §20.28)