The design, size, shape and orientation of each lot, which provides for a suitable building site, shall be appropriate to its location and type of development contemplated. The following standards shall apply:
1. The lot lines of all lots, so far as practical, shall be at approximately right angles to the fronting street, or approximately radial to the center of the curvature, if the street is curved. Sidelines of each lot shall be approximately radial to the center of the curvature of a cul-de-sac, where applicable;
2. No lot shall be divided by a City or special district boundary line. Division of the lot by a tax code boundary shall be avoided;
3. Corner lots for residential use shall have extra width pursuant to Section 19.04.030(1) (Table 04.02) to permit appropriate building setback from both streets;
4. Through lots and reverse corner lots shall be avoided;
5. All lots that abut on arterial streets or the freeway shall have an additional 10 feet of depth which shall be included as part of the landscape maintenance district;
6. No remnants of property, with the exception of 1 foot control lots and approved nonbuildable sites, shall be created which do not conform to lot requirements or which are not required by public or private utility purposes;
7. Lot lines between adjacent lots within a subdivision shall be located at the top of any graded slope; and
8. All lots shall conform to the requirements contained in this Development Code.