§ 23.09.005 CONTENTS.
   The contents of the final map shall conform to the provisions of the Subdivision Map Act and as follows:
   (A)   Title. Each sheet shall have a title showing the subdivision number and name and the location of the property being subdivided with reference to maps which have been previously recorded or by reference to the plat of a United States Survey. The words “County of San Benito” shall appear in the title.
   (B)   Scale, north point and basis of bearings. There must appear on each map sheet the scale, the north point and the basis of bearings.
   (C)   Linear, angular and radial data. Sufficient linear, angular and radial data shall be shown to determine the bearings and lengths of monument lines, street centerlines, the boundary lines of the subdivision, the boundary lines of every lot and parcel which is a part of the subdivision, and ties to existing monuments used to establish the boundary. Arc length, radius and total central angle and radial bearings of all curves shall be shown. Ditto marks shall not be used in the dimensions and data shown on the map.
   (D)   Subdivision boundary. The boundary of the subdivision shall be designated by a distinctive border in such a manner as not to obliterate figures or other data. Boundary shall be the limit of the underlying fee and title explanation shall be supplied where the boundary is not the centerline of abutting rights- of-way.
   (E)   Adjoining properties. The adjoining corners of all adjoining subdivisions shall be identified by subdivision number and name and reference to the book and page of the recorded map showing the subdivision; if no subdivision is adjacent, then by reference to the last recorded deed by book and page number.
   (F)   Lots. Lot lines shall be shown and dimensioned. The total area of each lot, calculated to the nearest thousandth of an acre or square foot, shall be indicated. Lot numbers shall begin with the number one in each subdivision and shall continue consecutively with no omissions or duplications. Each lot shall be shown entirely on one sheet of the final map, unless approved by the County Engineer.
   (G)   City and county boundaries. City and county boundaries which cross or join the subdivision shall be clearly designated.
   (H)   Street names. The names of all streets, alleys or highways within or adjoining the subdivision shall be shown.
   (I)   Monuments. The location and description of all existing and proposed monuments shall be shown. Standard county monuments shall be set at or on County Engineer approved offsets, at the following locations:
      (1)   The intersection of street centerlines;
      (2)   The beginning and end of curves or intersection of tangents on centerlines; and
      (3)   Other locations as may be required by the County Engineer.
   (J)   Easements and dedications.
      (1)   Easements and dedications for roads or streets, paths, alleys, utilities, local transit facilities, stormwater drainage, sanitary sewers or other public use as may be required, shall be dedicated to the public for acceptance by the county or other public agency, and the use shall be specified on the map. All easements of record shall be shown on the final map with the widths, lengths and bearings of record.
      (2)   All easements of record shall be shown on the map, together with the name of the grantee and sufficient recording data to identify the conveyance (e.g., Recorder’s serial number and date, or book and page of official records).
      (3)   Easements not disclosed by the records in the office of the County Recorder and found by the Surveyor or Engineer to be existing, shall be specifically designated on the map, identifying the apparent dominant tenements for which the easement was created.
   (K)   Certificates and acknowledgments. All certificates and acknowledgments shall be made as required by Cal. Gov’t Code Article 2 (commencing with § 66433) of Chapter 2 of Division 2 of Title 7 and shall appear only once on the cover sheet. Certificates shall include certificates for execution by the County Surveyor, Secretary of the Planning Commission, Clerk of the Board of Supervisors and County Recorder.
   (L)   Additional information.
      (1)   Additional survey and map information including but not limited to building envelopes, flood hazard zone, building setback lines, seismic zones geologic mapping and archaeological sites may be required. The information shall be in the form of an additional map sheet or a separate document that shall indicate its relationship to the final or parcel map according to Cal. Gov’t Code § 66434.2.
      (2)   Any additional information as required by the County Engineer.
(1966 Code, § 17-31) (Ord. 617, § 2(part))