(A) Three sets of plans will be required with all applications for a “tree pruning/removal permit”. Each plan sheet shall be of suitable scale and size. All applications shall be signed by owners of each parcel of property on which tree cutting or removal will be conducted.
(B) Plans shall be drawn to suitable scale and size upon substantial reproducible material and shall be of sufficient clarity to indicate the nature and extent of the work proposed and show in detail that it will conform to the provisions of this chapter and all other relevant laws, ordinances and regulations. The location of the work, the name and address of the owner, and the parcel number of the property on which the tree cutting is to be done shall be clearly shown on each set of plans. The base line aerials may be the best base for submittals. The plans shall include the following information:
(1) A statement as to the specific intentions or ultimate purpose for which the tree cutting or removal is being done;
(2) General vicinity of the proposed site;
(3) Property limits and contours (USGS contours may be used) of existing ground and details of terrain and area drainage;
(4) Location of any building or structures on the property which may be affected where the work is to be performed and the location of any buildings or structures on land of adjacent owners which are within 15 feet of the property or which may be affected by the proposed tree cutting or removal;
(5) Approximate start and completion dates; and
(6) Other information required by the county necessary to adequately describe and analyze the proposed project.
(C) Applications for tree cutting or removal that do not contain the required information will not be accepted.
(1966 Code, § 33-9) (Ord. 757, § 1(part))