Any private entrance onto public streets constructed after the passage of this section must comply with the following written regulations.
(a) All private drives that are to be constructed shall be the responsibility of the individual wishing said driveway.
(b) A permit must be obtained from the Enforcement/Zoning Officer. No construction shall start unless a permit is obtained.
(c) The Enforcement/Zoning Officer shall determine the size (diameter) of the culvert required.
(d) No culvert shall be less than twenty feet in length. Longer length and head walls may be required if the Enforcement/Zoning Officer finds it necessary.
(e) All culverts shall be corrugated metal pipe, reinforced concrete, or an approved type of equal strength.
(f) Backfill for the culvert shall be stone or gravel aggregate of size No. 310.
(g) The grade shall be on the flow line of the existing side ditch and shall slope with the natural grade of the side ditch unless otherwise directed by the Enforcement/Zoning Officer.
(h) The owner shall be responsible for the purchase of all materials and the installation of the materials and shall pay all the costs of said materials and labor.
(i) The Enforcement/Zoning Officer shall inspect the driveway after construction to check compliance of the above.
(j) Payment of the permit fee as set by Council in the Schedule of Rates and Fees shall be required upon application for the permit.
(Ord. 494. Passed 8-29-75; Ord. 20-1182. Passed 10-19-20.)