§ 74.25 MINIMUM STANDARDS FOR BRAKES AND COMPONENTS.
   (A)   No brake lining, brake lining material, or brake lining assemblies for use as repair and replacement parts in motor vehicles shall be sold in this municipality if these items do not meet or exceed the minimum standard of specifications established by the Society of Automotive Engineers and the standard of specifications established in 49 C.F.R. § 571.105, as amended, and 49 C.F.R. § 571.135, as amended.
   (B)   All manufacturers or distributors of brake lining, brake lining material, or brake lining assemblies selling these items for use as repair and replacement parts in motor vehicles shall state that the items meet or exceed the applicable minimum standard of specifications.
   (C)   As used in this section, MINIMUM STANDARD OF SPECIFICATIONS means a minimum standard for brake system or brake component performance that meets the need for motor vehicle safety and complies with the applicable SAE standards and recommended practices, and the federal motor vehicle safety standards that cover the same aspect of performance for any brake lining, brake lining material, or brake lining assemblies.
(R.C. § 4513.202)
   (D)   Whoever violates this section is guilty of a minor misdemeanor on a first offense; on a second offense within one year after the first offense, the person is guilty of a misdemeanor of the fourth degree; on each subsequent offense within one year after the first offense, the person is guilty of a misdemeanor of the third degree.
(R.C. § 4513.99) Penalty, see § 70.99