(A) Cut and fill slopes shall not be steeper than two to one unless stabilized by a retaining wall or cribbing, except as approved by the Building Inspector when handled under special conditions.
(B) Provisions shall be made to prevent surface water from damaging the cut face of excavations or the sloping surfaces of fills, by installations of temporary or permanent drainage across or above these areas.
(C) Cut and fills shall not endanger adjoining property.
(D) Fill shall be placed and compacted so as to minimize sliding or erosion of the soil.
(E) Fill shall not encroach on natural watercourses or constructed channels.
(F) Fills placed adjacent to natural watercourses or constructed channels shall have suitable protection against erosion during periods of flooding.
(G) Grading will not be done in such a way so as to divert water on to the property of another landowner without the expressed consent of the Building Inspector.
(H) During grading operations, necessary measures of duct control will be exercised.
(I) Grading equipment will not be allowed to ford live streams.
(J) Provision will be made for the installation of temporary or permanent culverts or bridges.
(Ord. passed - -2006, § 80.42(E)) Penalty, see § 156.999