§ 155.046 DRAFTING.
   (A)   General. All plats submitted for approval shall be prepared by or under the supervision of a registered land surveyor in good standing with the state and in compliance with the laws of the state. All drawings shall be neat, legible, reproducible, reducible and drawn on a quality paper capable of being scanned into the records in the office of the Recorder of the county.
   (B)   Size and signatures. All plats of subdivisions and surveys shall be drawn on a quality paper as described in division (A) above and shall be a minimum of 18 inches by 24 inches in size and shall bear original signatures.
   (C)   Lettering, symbols and drafting. Letter identifying surveying points or labeling items displayed graphically shall be done using a Leroy or equivalent lettering system, or freehand using plastic lead (E1 to E3). Lettering shall be no smaller than 14-point or one-eighths inch in height and shall be legible when the drawing is reduced 65%. Symbols shall be drawn using appropriate templates. Certificates and notations shall be typewritten or drawn using a Leroy or equivalent lettering system. Drafting may be done with pen and ink or plastic lead as specified above.
(Ord. passed 6-5-1991; Ord. 2006-14, passed 10-6-2006)