The use of a manufactured home as a permanent residential dwelling on an individual lot shall be permitted in any zoning district of the chapter which permits installation of a single-family site-built dwelling, provided the following standards are met:
A. Is multi-section and at least twenty feet (20') wide.
B. Has a minimum floor area of one thousand (1,000) square feet.
C. Has roofing materials which are generally acceptable for site-built housing. Any roofing materials may be used provided it has the appearance of a non-metallic shingle, shake or tile roof. Roofs shall also have a minimum slope of twenty five percent (25%) (3:12) and a minimum twelve inch (12") overhanging eaves.
D. Has siding materials which are generally acceptable for site-built housing. Any siding materials may be used provided it has the appearance of wood, masonry or horizontal metal siding. Reflection from horizontal metal siding shall be no greater than that from siding coated with white, gloss enamel.
E. Has a foundation of concrete or other material allowed by the International Residential Code for site-built homes which is aesthetically compatible with the manufactured home having the appearance of site-built construction. This means the exterior foundation shall be an extension of the siding or be of materials having the appearance of site-built foundations such as brick, concrete or concrete block.
F. Is permanently affixed per manufacturer's instructions. Concrete footings shall be thirty six inches (36") below grade.
G. Has a crawl space with the following minimum measurements: 1) eighteen inches (18") of clearance; 2) twelve inches (12") of clearance under beams; and 3) an eighteen inch by twenty four inch (18" x 24") door.
H. Complies with all applicable lot size, setback, and other requirements of the zoning district in which it is to be located.
I. Provides two (2) off-street parking spaces.
J. Provides right-of-way improvements in the same manner as site-built construction, in accordance with the International Residential Code.
K. Manufactured home owners or purchasers shall own or be purchasing the land upon which their home is to be placed. The owner or purchaser shall record with the County Recorder a non-revocable option declaring the manufactured home as real property.
L. Manufactured homes shall meet the requirements of the International Energy Conservation Code or other equivalent standard approved by the City of Rigby. (Ord. 474, 5-18-1999; amd. Ord. 2021-619, 9-14-2021)