(a) If the City or its duly authorized representative determines that a violation of the rules adopted under this code exist, the City or representative may issue an immediate stop work order if the violator failed to obtain any federal, state, or local permit necessary for sediment and erosion control, earth movement, clearing, or cut and fill activity.
(b) All development areas may be subject to external inspections by the City Engineer to ensure compliance with the approved SWP3 or Abbreviated SWP3.
(c) After each external inspection, the City Engineer shall prepare and distribute a status report to the applicant.
(d) If an external inspection determines that operations are being conducted in violation of the approved SWP3 or Abbreviated SWP3, the City Engineer may take action as detailed in Section 1195.14 of this regulation.
(e) Failure to maintain and repair erosion and sediment controls per the approved SWP3 plan may result in the following escalation:
(1) First Violation: The City Engineer will issue a Notice of Deficiency to the owner or operator. All controls are to be repaired or maintained per the SWP3 plan within three (3) days of the notification. If controls have not been corrected after this time, the City Engineer may issue a Stop Work Order for all activities until corrections have been made.
(2) Second Violation: The City Engineer may issue a formal Notice of Violation which includes a $250 administrative fee against the SWP3 Bond or site plan deposit. All controls are to be repaired or maintained per the approved SWP3 plan within three (3) days of the Notice of Violation. If controls have not been corrected after this time, the City Engineer may issue a Stop Work Order for all activities until corrections have been made.
(3) Third and subsequent violations: The City Engineer may issue a Stop Work Order for all construction activities and charge a $250 administrative fee against the SWP3 bond or site plan deposit. The Stop Work Order will be lifted once all controls are in compliance with the approved SWP3 plan.
(f) The City Engineer shall have the authority to make immediate on-site adjustments to the SWP3 in order to achieve compliance with this ordinance.
(g) A final inspection will be made to determine if the criteria of this code has been satisfied and a report will be presented to the City on the site's compliance status.
(h) The City Engineer will monitor soil-disturbing activities for non-farm residential, commercial, industrial, or other non-farm purposes on land of less than one contiguous acre to ensure compliance required by these Rules.
(i) The City Engineer shall notify the U.S. Army Corps of Engineers when a violation on a development project covered by an Individual or Nationwide Permit is identified. The City Engineer shall notify the Ohio Environmental Protection Agency when a violation on a development project covered by a Section 401 Water Quality Certification and/or Isolated Wetland Permit is identified.
(j) The City shall not issue building permits for projects regulated under this code that have not received approval for an SWP3 for said project(s).
(Ord. 121-2016. Passed 1-17-17.)