Office or light industrial subdivisions developed with frontage and access on interior office or industrial park roadways may be permitted as approved by the Commission and Council under the following conditions and standards:
(a) The office/light industrial subdivision shall be initially planned, platted and improved by one entity, corporation or person.
(b) The total development area within the subdivision shall be not less than 12 acres.
(c) Any lot within the development having frontage and/or access on a major road shall meet all of the standards required in the other sections of this Chapter.
(d) An interior public roadway shall be constructed providing the required frontage, lot width and lot area as required herein prior to the sale of individual lots or the construction of buildings or permitted uses. The construction and dedication of the roadway may be phased upon approval of the Commission where each phase of the subdivision meets all of the requirements of this section.
(e) The minimum lot area for any interior office or light industrial lot not having frontage or access on a major road shall be three acres.
(f) The mean lot area of all lots within the subdivision shall not be less than four acres.
(g) The minimum lot frontage at the street right-of-way and lot width of interior lots in the subdivision shall be 200 feet, except on a cul-de-sac, where the minimum lot frontage at the street right-of-way shall be 100 feet.
(h) All other standards of the O/LI Districts not listed within this section shall apply, including, but not limited to, permitted uses, yard requirements, height, signs, parking, loading, building and design standards, and development plans for each building and site improvement.
(i) Subdivisions shall comply with applicable rules and regulations for plats and subdivisions of the Village. All lots shall be serviced with central sanitary sewers and public water supply.
(Ord. 25-2011. Passed 9-20-11.)