909.01 MAILBOX SUPPORTS.
   (a)   Mailbox installations located within the public right of way shall be installed as shown in Figure 909-1 using “breakaway” type supports. Satisfactory supports are as follows:
      (1)   Maximum 4 inches by 4 inches (100 mm X 100 mm) square or 4-1/2 inch diameter (115 mm) round timber.
      (2)   Maximum 2 inch diameter (2-3/8 inch O.D.) (Maximum 60.3 mm O.D.) Schedule 40 standard strength steel pipe.
      (3)   Any material with breakaway cross section characteristics equivalent to subsection (a)(1) or (2) hereof.
   (b)   Group mailbox supports should be placed on three-foot centers and the turnout lengthened to accommodate the grouping. No more than two mailboxes shall be placed on each post.
   (c)   Where guardrail exists, mailboxes and their supports should be located behind the guardrail. Supports must still meet the breakaway requirements listed above.
(Ord. 57-2009. Passed 11-3-09.)