(A) An approved backflow prevention device shall be installed on each service line to a consumer’s water system serving premises, where in the judgment of the Director of Utilities and Engineering, actual or potential hazards to the public water supply system exist.
(B) An approved backflow prevention device shall be installed on each service line to a consumer’s water system serving premises where the following conditions exist:
(1) Premises having an auxiliary water supply, unless the auxiliary supply is accepted as an additional source by the Director of Utilities and Engineering and the source is approved by the State Environmental Protection Agency;
(2) Premises on which any substance is handled which can create an actual or potential hazard to the public water supply system. This shall include premises having sources or systems containing process fluids or water originating from the public water supply system which are no longer under the sanitary control of the Director of Utilities and Engineering;
(3) Premises having internal cross connections that, in the judgment of the Director of Utilities and Engineering, are not correctable or intricate plumbing arrangements which make it impractical to determine whether or not cross connections exist;
(4) Premises where, because of security requirements or other prohibitions or restrictions, it is impossible or impractical to make a complete cross connection survey; and
(5) Premises having a repeated history of cross connections being established or reestablished.
(C) An approved backflow prevention device shall be installed on each service line to a consumer’s water system serving, but not necessarily limited to, the following types of facilities unless the Director of Utilities and Engineering determines that no actual or potential hazard to the public water supply system exist:
(1) Hospitals, mortuaries, clinics, nursing homes;
(2) Laboratories;
(3) Piers, docks, waterfront facilities;
(4) Sewage treatment plants, sewage pumping stations or stormwater pumping stations;
(5) Food or beverage processing plants;
(6) Chemical plants;
(7) Metal plating industries;
(8) Petroleum processing or storage plants;
(9) Radioactive material processing plants or nuclear reactors; and
(10) Car washes.
(1980 Code, § 25.506) Penalty, see § 52.999