(A) Purpose. The purpose of the final plat is to designate with particularity the planned development. The final plat is intended to be a document which will be recorded. The final plat shows the location of facilities with reasonable accuracy, while the preliminary plat shows the general location of the same facilities.
(B) Procedure. The final plat shall be submitted as a planned development plat and shall conform substantially to the preliminary plat as approved and, if desired by the developer, may be submitted in stages with each stage reflecting the approved preliminary plat which is proposed to be recorded and developed; provided, however, that the portion conforms to all requirements of these regulations. The required procedure for approval of the final plat shall be as follows.
(1) Director of Utilities and Engineering. A final planned development plat and other supporting data required for approval shall be submitted to the Director of Utilities and Engineering. Final plats and supporting data shall show in detail the design, location and use of all buildings, facilities and site improvements as well as any additional information as the City Council, the Plan Commission, the Director of Utilities and Engineering or the Secretary of the Plan Commission may require or have required.
(2) Certification. After the review by the Director of Utilities and Engineering, the final plat and supporting data shall be certified by the City Clerk, the Director of Utilities and Engineering and the Secretary of the Plan Commission as being in conformity with these regulations and in agreement with the approved preliminary plat. If the City Clerk, the Director of Utilities and Engineering or the Secretary of the Plan Commission shall not consider the plat and plans to be in conformity with the preliminary plat approved, then the official shall refer the plat back to the City Council for the review and approval of any modifications. Thereafter, the plat shall again be resubmitted as a final plat for approval and certification.
(1980 Code, § 29.907) Penalty, see § 162.999