§ 154.112 LOTS.

   (A)   All lots shall have a suitable relationship to street and block design and be compatible with the area’s physical conditions.

   (B)   All lots shall conform to the lot design standards provided for in this chapter and shall conform to the zoning ordinance, as codified in Chapter 155 of this code of ordinances.

   (C)   The Plan Commission may establish reduced or expanded lot area requirements in areas where conditions of soil, groundwater, drainage slope or other physical factors necessitate such changes.

   (D)   Lots with double frontage shall not be permitted except where no access buffer strips, of a size determined by the Plan Commission, is approved along one street.

   (E)   Lots shall have building setback line which shall be established to compliment the development pattern but which may not be less than the following: the distance established in §§ 155.020 through 155.033 of the zoning regulations.

   (F)   The lot size, width, depth, shape, grade, location and orientation shall be in proper relation to street and block design and to existing and proposed topographical conditions.

   (G)   Every lot or parcel shall have sufficient frontage and access to a public street designated, designed and improved in accordance with the terms of this chapter.

   (H)   The depth to width ratio of any single-family residential lot shall not be greater than three to one for any lot smaller than one acre.

   (I)   Minimum lot sizes (in a subdivision).

 

Type of Development	Sewer and Public Water Available to Be Used	Public Water or Sanitary Sewer Available and to Be Used	Neither Public Water or Sewer Available
Single-family	20,000—30,000	32,000 sq. ft., net buildable	1 acre, net buildable
Mobile home	5,000 sq. ft.	30,000 sq. ft., net buildable	1 acre, net buildable
Two-family	30,000 sq. ft.	38,000 sq. ft., net buildable	1.5 acres, net buildable

 

(Ord. passed 7-20-1992)