The final plat must be in a form approved by the County Recorder and shall contain at least the following items:
(A) Name of subdivision and section number, surveyor’s stamp, address and phone number on all pages of the plat except pages showing only covenants and special conditions;
(B) Legal description including section, township and range; and survey meeting state survey standards with bearings and linear dimensions and showing the entire boundary of plat;
(C) Scale, date and north point;
(D) Location and width of each street right-of-way within and adjacent to the plat;
(E) Bearings and distances to a minimum of two section corners or quarter section corners or to a corner of a recorded subdivision which shall be accurately described and referenced on the plat;
(F) Corporate, township and county lines within and adjacent to the plat;
(G) Show name of each street within and adjacent to the plat; curve radii including angle, length of curve, length of tangent, length of chord and chord bearing (tables may be used);
(H) All easements including widths for public and private ways and utilities;
(I) Accurate location of all monuments and markers and materials to be used;
(J) Location and purpose of all areas dedicated to public use;
(K) Front (yard) building setback line;
(L) Notarized certification by owner of plat for dedication of streets;
(M) Acceptance by the County Board of County Commissioners of all dedicated areas and improvements;
(N) Signature of the Director of the County Plan Commission.
(O) All covenants and conditions approved by the Plan Commission;
(P) Recording information of any previously recorded subdivision shall be shown on the front page of the plat;
(Q) Abutting recorded plat name and recording information;
(R) Street names and lot addresses as approved by the Director in conjunction with the Director of E911, other affected emergency operations and the postal service; and
(S) Three sets completed final construction plans.
(Ord. passed 7-20-1992)