(1) Lot dimensions, including, but not limited to, lot width, lot depth and lot area, shall comply with the minimum standards of the applicable zoning ordinance, zoning commitment, variance grant or development plan approval.
(2) Land reserved for any proposed street, drainage pond, wetland or lands subject to periodic flooding shall not be counted in satisfying the minimum yard and lot area requirements of the Town Zoning Ordinance.
(3) In general, lots shall be arranged so that:
(a) Side lot lines are at right angles to street lines (or radial to curving street lines) unless a deviation from this rule will give a better street or lot plan;
(b) Dimensions of corner lots shall be large enough to allow for the erection of buildings while observing the minimum required front yard setback applicable on each street frontage; and
(c) Commercial or industrial lots shall be of adequate size and configuration to provide for off-street parking, off-street loading, bufferyards and other applicable requirements of the Town Zoning Ordinance.
(Ord. 22-97, passed - -1997; Ord. 11-2004, passed 6-14-2004)