In addition to the provisions of Chapter 1183, the following standards for arrangement and development of land and buildings are required in the I2 Limited Industrial District.
(a) Intensity of Use. Lot size shall be adequate to provide the yard space required by these development standards and the following provisions:
(1) A use allowed in this district shall entirely enclose its primary operation within a structure. Service areas and loading docks shall be screened by walls, fences, mounding, landscaping, or a combination of the above at least six feet, but not more than twelve feet, in height. These walls, fences, mounding, and landscaping shall have an opaqueness of seventy- five percent (75%) or more, so as to effectively conceal production, service and loading operations from adjoining streets and from a residential zoning district or a planned district as listed in Section 1141.02
.
(b) Lot Width. All lots shall abut a public street for a distance of 100 feet or more and have adequate lot width to provide the yard space required by these development standards.
(c) Side Yards. For main and accessory structures, including service and loading areas, the required side yards shall be not less than twenty-five feet or more on each side when adjacent to a non-residential zoning district or one hundred (100) feet when adjacent to any residential zoning district as listed in Section 1141.02
.
(d) Rear Yards. For main and accessory structures including open storage, service and loading areas, the required rear yards shall be not less than fifty feet when adjacent to a non residential zoning district or two hundred (200) feet when adjacent to any residential zoning district or planned district as listed in Section 1141.02
.
(Ord. 05-08. Passed 2-25-08.)