In addition to the provisions of Chapter 1183, the following standards for arrangement and development of land and buildings shall be required in the B2 Community Business District.
(a) Intensity of Use. No minimum lot size is required; however, lot size shall be adequate to provide the yard space required by these development standards.
(b) Lot Width. No minimum lot width is required; however, all lots shall abut a street and have adequate width to provide the yard space required by these development standards.
(c) Side Yards. A side yard shall be required adjacent to a residential zoning district as listed in Section 1141.02
. Such side yards shall be a minimum of thirty-five (35) feet on each side as measured from the side lot line and shall be landscaped in accordance with the standards in Chapter 1187.
(d) Rear Yard. A rear yard shall be required adjacent to a residential zoning district or a planned development zoning district as listed in Section 1141.02
. Such required rear yard shall be fifty (50) feet as measured from the rear lot line and shall be landscaped in accordance with the standards in Chapter 1187. A use to be serviced from the rear shall have a service court, alleyway or combination thereof not less than forty feet wide.
(e) Front Building Setback. No building or use shall be located closer than fifty (50) feet to the right-of-way line of any adjacent public or private street, or seventy-five (75) feet to the back of curb of such street, whichever is greater, except where the lot abuts an arterial street, where there shall be a minimum setback of one hundred (100) feet from the right-of-way line for buildings exceeding 8,000 square feet. Buildings located on corner lots shall maintain the same building setbacks from the right-of-way lines of the adjacent public or private roads.
(f) Building Size. Principal structures in the B2 District shall not exceed 12,000 square feet without a conditional use permit.
(Ord. 05-08. Passed 2-25-08.)