In addition to the provisions of Chapter 1183, the following standards for arrangement and development of land and buildings are required in the RS2 Single Family Residential District.
(a) Lot Area and Coverage. For each dwelling unit there shall be a lot area not less than 14,520 square feet per dwelling unit. Only one principal use shall be permitted on a lot, and such lot shall not be covered more than thirty percent (30%) by structure.
(b) Lot Width. For a single-family dwelling there shall be a lot width of 80 feet or more at the front building line and such lot shall have access to and abut on a public right of way for a distance of sixty (60) feet or more. On a curving street or cul-de-sac forty-five (45) feet of frontage or more on an improved public right-of-way is required and lot width shall be eighty (80) feet or more at the minimum building line.
(c) Front Yard Setback. For dwellings there shall be a front yard setback of fifty (50) feet as measured from the street right of way line.
(d) Side Yard Setback. For dwellings there shall be a side yard setback of fifteen (15) feet or more on each side as measured from the side lot line. For accessory buildings there shall be a side yard setback of eight (8) feet or more on each side as measured from the side lot line.
(e) Rear Yard Setback. For main buildings there shall be a rear yard of forty (40) feet or more as measured from the rear property line. For associated accessory buildings there shall be a rear yard setback of eight (8) feet or more as measured from the rear property line.
(f) Maximum Height. No dwelling structure shall exceed thirty-five feet in height. Height of other structures shall not exceed the height of the dwelling structure.
(g) Minimum dwelling structure size. No dwelling unit shall have less than 1,700 square feet of finished floor area.
(Ord. 15-10. Passed 9-13-10.)