In addition to the provisions of Chapter 1183, the following standards for arrangement and development of land and buildings are required for permitted uses in the RS1 Single Family Residential District.
(a) Lot Area and Coverage. For each dwelling unit there shall be a lot area not less than 21,780 square feet per dwelling unit. One principal use shall be permitted on a lot, and such lot shall not be covered more than thirty percent (30%) by structure.
(b) Lot Width. For a one family dwelling there shall be a lot width of one hundred (100) feet or more at the front building line and such lot shall abut on a public right of way. On a curving street or cul-de-sac fifty-five (55) feet of frontage on an improved public right-of-way is required and lot width shall be one hundred (100) feet or more at the minimum building line.
(c) Front Yard Setback. For dwellings there shall be a front yard setback of sixty (60) feet or more as measured from the street right of way line.
(d) Side Yard Setback. For dwellings or associated accessory buildings there shall be a side yard setback of twenty (20) feet or more on each side as measured from the side lot line.
(e) Rear Yard Setback. For dwellings there shall be a rear yard setback of forty (40) feet or more as measured from the rear property line. For associated accessory buildings there shall be a rear yard setback of 20 feet or more as measured from the rear property line.
(f) Maximum Height. No dwelling structure shall exceed thirty-five feet in height. Height of other structures shall not exceed the height of the dwelling structure.
(g) Minimum dwelling structure size. No dwelling unit shall have less than 1,900 square feet of finished floor area.
(Ord. 05-08. Passed 2-25-08.)