10-8-14: PREPARATION OF PARCEL MAPS:
The parcel map shall be prepared by or under the direction of a registered civil engineer or licensed land surveyor, shall show the location of streets and property lines bounding the property, and shall conform to all of the following provisions:
   (A)   It shall be legibly drawn, in black drawing ink or by a process guaranteeing a permanent record in black on tracing cloth or other material acceptable by the county recorder. Certificates may be legibly stamped or printed upon the map with permanent black ink;
   (B)   The size of each sheet shall be eighteen inches by twenty six inches (18"x26"). A marginal line shall be drawn completely around each sheet, leaving an entirely black margin of one inch (1"). The scale of the map shall be large enough to show all details clearly. Any number of sheets may be used to accomplish this providing each sheet specifies the total number of sheets and its relation to each adjoining sheet;
   (C)   Each parcel shall be numbered or lettered;
   (D)   The exterior boundary of the land included within the division shall be indicated by heavy lines;
   (E)   The map shall show the location of each parcel and its relation to surrounding surveys. The location of any remainder of the original parcel shall be shown, but need not be shown as a matter of survey, but only by reference to the existing record boundaries of such remainder if such remainder has a gross area of five (5) acres or more;
   (F)   A certificate or by separate instrument, signed and acknowledged by all parties having any record title interest in the real property divided, consenting to the preparation and filing of the parcel map is required, except as otherwise provided by section 66436 of the subdivision map act; (Ord. 1152, 4-25-1978)
   (G)   The scale of the final parcel map shall be one inch equals twenty feet (1"=20'), one inch equals fifty feet (1"=50'), one inch equals one hundred feet (1"=100'), one inch equals two hundred feet (1"=200'), or one inch equals four hundred feet (1"=400') or as approved by the development services director; (Ord. 1152, 4-25-1978; amd. Ord. 1654, 6-25-2013)
   (H)   The parcel map shall be labeled as a "parcel map" in the heading identifying section, township, and range, and prior parcel map, if any, and/or lot and block; (Ord. 1152, 4-25-1978)
   (I)   The existing assessor's parcel number and the tentative map number with the date approved by the development services department shall be shown in the lower right hand corner; (Ord. 1152, 4-25-1978; amd. Ord. 1654, 6-25-2013)
   (J)   The location, nature and type and marking thereon of all monuments found shall be shown, including all monuments required; (Ord. 1152, 4-25-1978)
   (K)   Together with a fee as required by section 4-8-1 of this code to defray the costs incidental to the processing of such final map. (Ord. 1263, 5-26-1981)
The map shall be accompanied by two (2) sets of prints of the map and copies of original traverse sheets prepared by an engineer or surveyor showing mathematical closures and proof of the accuracy. (Ord. 1152, 4-25-1978)