The final plat shall contain the following applicable information:
(a) Name of the subdivision, location by section, range and township, date, north point, scale, and acreage.
(b) Name and address of the subdividers, and the professional engineer and/or registered surveyor who prepared the plat and appropriate registration numbers and seals.
(c) All measurements/dimensions shown on the plat shall be in accordance with Chapter 4733-37, Ohio Administrative Code (Chapter 119, ORC), "Minimum Standards for Boundary Surveys in the State of Ohio."
(d) Bearings and distances to be recognized as permanent monuments.
(e) Exact locations, right-of-way, and names of all streets within and adjoining the plat, and building setback lines.
(f) Radii, internal angles, points of curvature, tangent bearings, length of arcs, and lengths and bearings of chords of all applicable streets within the plat area.
(g) All easements and rights-of-way provided for public services or utilities.
(h) Signature blocks as shown in Appendix “A”.
(i) All lot numbers and lines with accurate dimensions in feet and hundredths. When lots are located on a curve, the lot width at the building setback line shall be shown.
(j) Accurate location and description of all monuments.
(k) Accurate outlines of areas to be dedicated or reserved for public use, or any area to be reserved for the common use of all property owners. The use and accurate boundary locations shall be shown for each parcel of land to be dedicated.
(l) A copy of any restrictions and covenants the subdivider intends to include in the deeds to the lots in the subdivision.
(m) Certification by a registered surveyor to the effect that the plat represents a survey made by him and that the monuments shown thereon exist as located and that all dimensional details are correct.
(n) The location of and a description of all monuments and pins as specified herein.
(Ord. 9-1993. Passed 7-12-93.)