§ 150.25 COMPLIANCE WITH CODES.
   (A)   (1)   All buildings or structures which are hereafter constructed, reconstructed, erected, altered, extended, enlarged, repaired, demolished, or moved shall conform to the requirements, minimum standards, and other provisions of either the State Building Code, General Construction, Volume I or the State Building Code, Volume I-B, Residential, whichever is applicable, or of both if both are applicable.
      (2)   Additionally, any residential structure erected in the town must be so constructed that groundwater drains away from the structure.
      (3)   All residential structures must have a back slope and a drainage plan for the building site.
   (B)   Every building or structure intended for human habitation, occupancy, or use shall have plumbing, plumbing systems, or plumbing fixtures installed, constructed, altered, extended, repaired, or reconstructed in accordance with the minimum standards, requirements, and other provisions of the state’s Plumbing Code (State Building Code, Volume II, Plumbing).
   (C)   All mechanical systems consisting of heating, ventilating, air conditioning, and refrigeration systems, fuel burning equipment, and appurtenances shall be installed, erected, altered, repaired, used, and maintained in accordance with the minimum standards, requirements, and other provisions of the state’s Heating Code (State Building Code, Volume III, Heating).
   (D)   All electrical wiring, installations, and appurtenances shall be installed, erected, altered, repaired, used and maintained in accordance with the minimum standards, requirements, and other provisions of the state’s Electrical Code (State Building Code, Volume IV, Electrical).
   (E)   Any violation of State Building Codes will be investigated and enforced by officials from the county.
(Prior Code, § 4-25) Penalty, see § 150.99