Subdivision plats submitted to the Village for review and approval shall be 18 inches by 30 inches in size and be drawn at a scale of 1" = 100'. Final subdivision submittals shall include, at a minimum, the following:
(a) A vicinity or location map at a scale of 1" = 1000' showing the relationship of the proposed subdivision to the surrounding area.
(b) The name of the subdivision, north arrow, scale, and date.
(c) The names of all adjoining property owners.
(d) The property boundaries with length of courses in feet and hundredths and bearings to not more than half seconds.
(e) The curve data for streets including the radii, arcs, chords, chord bearings, tangent, and central angle.
(f) Accurate dimensions for all lots, reserve parcels, rights-of-way, and easements.
(g) The accurate location of all required monuments.
(h) A summary of the area of land used for each of the following: lots, rights-of-way, parks, and open space.
(i) Detailed construction plans prepared by a registered engineer for all required improvements at a scale of 1" = 50' on 24" by 36" sheets or at such other scale acceptable to the Village Engineer, or Zoning Officer in the absence of a Village Engineer.
(j) An erosion control and storm water plan.
(k) The location of setback lines from public rights-of-way as required by the Zoning Ordinance.
(l) An acknowledgment by the owner that the plat was prepared with his consent and is accepted by him and dedicating the streets and the appropriate easements and public areas to the Village. In the case of private streets, the required homeowner association documentation and deed restrictions.
(m) A statement signed by the owner setting forth the rights associated with the easements and reserve parcels shown on the plat.
(n) If the submittal is for a section or portion of the property only, an overall plan of the entire property showing the general subdivision layout of the entire parcel.
(o) A certification by a registered engineer or surveyor that the information contained on the plat is true and correct and conforms to the requirements of these Subdivision Regulations.
(p) A release signed by any mortgage holders regarding the dedication of rights-of-way and other lands set aside for public purposes.
(q) Evidence that any and all required approvals have been obtained from government agencies including but not limited to Ohio EPA, Army Corp of Engineers, Summit County Public Health, and Summit County Soil and Water.
(r) An approval block for the endorsement of the plat by the Mayor, Village Engineer (or Zoning Officer in the absence of a Village Engineer), and the Village Fiscal Officer upon approval by the Village Council.
(Ord. 21-2020. Passed 12-14-20.)