Monuments, markers, and pins shall be provided as follows.
(A) Type A. A cylindrical concrete marker six inches in diameter and 36 inches in length with a one quarter inch iron rod cast at the central axis of the cylinder. Said marker shall be placed in a vertical position with its top being level with the surface of the surrounding ground. One Type A monument shall be set at each change in direction of the boundary line of the plat at all points not in the pavement area.
(B) Type B. A cylindrical concrete marker as described for a Type A monument except that a machine type iron bolt (without nut) of one-inch diameter by 12 inches in length shall be placed in a vertical position with the head of the bolt upward and level with the surface of the pavement. (A point shall be marked on the head of the bolt to indicate the exact point referred to on the final plat.) One Type B monument shall be set at each point of intersection and change in direction of the centerline of street right-of-way alignment. Type B monuments shall also be provided at the point of intersection of a plat boundary line and the centerline of street right-of-way alignment.
(C) Type C. Lot corners not required to be occupied by concrete monuments shall be marked with a standard iron survey pin not less than five-eighths-inch in diameter and 30 inches long. Lot corner markers shall be installed to be flush with finished ground elevations.
(Ord. 1235, passed 7-16-2002)