The preliminary drawing shall contain the following information:
(A) Proposed name of the subdivision, which shall not duplicate or closely approximate the name of any other subdivision in the village;
(B) Location by section, range, and township or other surveys;
(C) Names, addresses, phone numbers, and fax numbers of the owner(s), subdivider(s)/ developer(s), and engineer, and surveyor who prepared the plat, with appropriate registration numbers and seals;
(D) Date of survey;
(E) Scale of the plat (not more than 100 feet to the inch) and north point;
(F) Boundaries of the subdivision and total acreage, together with proposed plats/phases of the subdivision and associated acreages;
(G) Names of adjacent subdivisions, owners of adjoining parcels of subdivided and unsubdivided land, and the approximate location of their boundary lines;
(H) Locations, widths, and names of existing streets, railroad rights-of-way, easements, parks, permanent buildings, corporation and township lines, location of wooded areas, and other significant topographic and natural features, all within the plat area, adjacent to the plat area, and within a minimum distance of 200 feet of the plat area;
(I) Existing zoning classification and proposed use(s) of the tract to be subdivided and the zoning classification and existing use(s) of adjoining properties. A description of proposed zoning changes, if any, shall also be included;
(J) Existing contours at an interval of not greater than two feet if the slope of the ground is 15% or less; and not greater than five feet where the slope is more than 15%;
(K) Locations and sizes of existing storm sewers, sanitary sewers, waterlines, culverts, underground structures, including their material of construction, and power transmission poles and lines within and adjacent to the tract;
(L) Regional flood elevations and boundaries of flood-prone areas as defined in § 441 (refer to Ordinance 1488 Flooding), including floodways, if known;
(M) Location, names, and widths of proposed streets and easements;
(N) Building setback lines with dimensions (setback lines along curved roadways and cul-de-sacs shall show dimension as measured along arcs);
(O) Location, approximate lengths, and sizes of all proposed storm sewers, sanitary sewers, and water lines as well as the location of other utility lines showing all connections with the existing utility systems;
(P) Layout, numbers, and approximate dimensions of each lot. When a lot is located on a curved street or when side lot lines are not at 90 degree angles, the width of the lot at the property line/right-of- way and at the front yard setback line shall be shown;
(Q) Parcels of land in acres to be reserved for public use or to be reserved by covenant for residents of the subdivision;
(R) Proposed fill or other structure elevating techniques, levees, channel modifications, seawalls, and other methods to overcome flood or erosion related hazards;
(S) A vicinity map at a scale of not less than 1,000 feet to the inch shall be shown on, or accompany, the preliminary drawing. This map shall show all existing subdivisions, roads, and tract lines and the nearest existing thoroughfares;
(T) Statement of proposed use of lots, giving type and number of dwelling units and type of business or industry;
(U) Location and approximate dimensions of all existing buildings;
(V) For commercial and industrial development, the location, dimensions, and approximate grade of proposed parking and loading areas, alleys, pedestrian walks, streets, and the points of vehicular ingress and egress to the development;
(W) Description of proposed covenants and restrictions; and
(X) Fifteen copies of the preliminary plat/drawing and one reduced eight and one-half-inch by 11-inch or 11-inch by 17-inch copy shall be submitted 21 days prior to the next scheduled meeting of the Planning Commission in order to be placed on the agenda.
(Ord. 1235, passed 7-16-2002)