Information Required | Sketch Plat | Preliminary Plat | Final Plat |
Information Required | Sketch Plat | Preliminary Plat | Final Plat |
A copy of any deed restrictions or similar covenants. | X | X | |
A sketch vicinity map showing the relationship between the proposed subdivision and surrounding area at an appropriate scale. | X | X | X |
A topographic map showing vertical contours every one foot. | X | X | X |
An accurately positioned north arrow tied into the North Carolina Grid System if within 2,000 feet of a monument. | X | X | |
Any other information considered by either the subdivider, Subdivision Review Committee, Subdivision Administrator, Planning Board or Board of Commissioners to be pertinent to the review of the plat. | X | X | |
Bench mark elevations established on the top of all fire hydrants within the subdivision and noted on the drainage plan. | X | ||
Corporate limits, township boundaries, county lines, if on the subdivision tract. | X | X | X |
Date of survey plat preparation. | X | X | |
Existing buildings or other structures, watercourses, railroads, bridges, culverts, storm drains, both on land to be subdivided and land immediately adjoining. | X | X | X |
Improvement certificate by the Department of Transportation stating the streets as installed or as designed and guaranteed meet state standards. | X | ||
Improvement certificate or letter of approval for water and sewage systems by appropriate county and state authorities. | X | ||
Letter from appropriate utility company certifying electric utilities will be installed underground. | X | ||
Letter from the Land Quality Section, Division of Land Resources approving the sedimentation and erosion control plan. | X | X | |
Letter of approval from Department of Transportation as to proposed roadway alignment and construction. | X | ||
Letter of approval of a stormwater drainage plan from the Division of Environmental Management. | X | X | |
Letter of tentative approval of water supply and sewage disposal plans by appropriate county and state authorities. | X | ||
Linear error of closure shall not exceed one foot per 7,500 feet. Angular error of closure shall not exceed 25 seconds times the square root of the number of angles turned. Plus or minus distance will not be approved. | X | ||
Minimum building setback lines only. | X | X | |
Name of township, county and state in which the subdivision is located. | X | X | X |
Other applicable certificates. | X | X | |
Payment for plat application fees. | X | X | X |
Payment for street signs. | X | ||
Payment for water laterals and meters within the County Water System service area. | X | ||
Payment of recreation fees. | X | ||
Proposed roadways, existing and platted streets on adjoining properties and in proposed subdivision, right-of-way, pavement widths, approximate grades, design and engineering data for all corners and curves and typical street cross sections. | X | X | |
Provide maintenance of streets guarantee until acceptance by State Department of Transportation. | X | ||
Scale denoted both graphically and numerically. | X | X | X |
Site data (to include zoning classification). | X | X | X |
Street names. | X | X | |
Sufficient data to determine readily and reproduce on the ground the location, bearing and length of every street line, lot line, boundary line, block line, and building, whether curved or straight. This should include the radius, central angle and tangent distance for the center line of curved streets and curved property lines that are not boundaries of curved streets. All dimensions shall be measured to the nearest 1/10 of a foot and all angles to the nearest minute. | X | ||
Ten year stormwater review by County Technical Staff. | X | X | |
The accurate locations and descriptions of all monuments, markers and control points. | X | ||
The blocks numbered consecutively throughout subdivision and the lots numbered consecutively throughout each block, square feet of each lot so indicated. | X | X | X |
The boundaries of the tract or portion thereof to be subdivided distinctly and accurately represented with all bearings and distance shown. | X | X | X |
The exact boundary lines of the tract to be subdivided, fully dimensioned by lengths and bearings, and the location of existing boundary lines of adjoining lands. | X | ||
The location and dimensions of all rights-of-way, utility or other easements. | X | X | X |
The name of the subdivision. | X | X | X |
The names, addresses and telephone numbers of all owners mortgagees, registered surveyors land planners and professional engineers responsible for the subdivision. | X | X | |
The names of adjoining property owners. | X | X | X |
The names of any adjoining subdivisions of record or proposed and under review. | X | X | |
The plans for utility layouts including sanitary sewers, storm sewers, water distribution lines, natural gas, telephone and electric service or plans for individual water supply systems and sewerage disposal systems. | X | X | |
The registration numbers and seals of the professional engineers and registered surveyors. | X | ||
Total acreage of tract to be subdivided with the location of previously subdivided lots within the tract. | X | ||
Wooded areas, marshes, swamps, rock outcrops, ponds or lakes, streams or stream beds and any other natural features affecting the site, including the location of known areas subject to flooding. | X | X | |
(Ord. passed 4-17-1989; Ord. 7, passed 7-17-1995; Ord. 11, passed 12-6-1999; Ord. 13, passed 4-23-2001)